Headlights

Lezyne Power STVZO Pro Headlight. German StVZO optimized lens with approved flood and long-range beam. High performance always-on LED delivers 310 lumens (115 Lux). Durable, heat-dissipating CNC machined aluminum construction. Auto day/night system extends battery runtime. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes X-Lock stem mount and CNC-machined aluminum fork mount. 130cm power cable included.

Lezyne Ebike Classic Stvzo E500 Headlight; An advanced StVZO certified e-bike cycling headlight. This light is housed in a high-quality machined aluminum body with computerized thermal management to maximize lumen output efficiency. Running on cutting-edge programming, this light offers up to an impressive 500 lumens of output. It comes with an integrated 130 cm (51.2 inches) cable that connects to the e-bike’s motor/battery system. Two mounting options are also included—one Composite Matrix front mount and one machined aluminum fork mount. Compatibility: 11 – 15v input, 7.5w. Download the manual below for further installation and compatibility. - 500 lumen - STVZO optimized lens - 130cm cable - Forward center mount and hardware

Epro 1000 is NiteRider's first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike's battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes-Steady ON and Pulse Flash-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 1000 - 2 Modes - Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts - Water / Dust Resistant IP64 Rated - Weight: 166 grams - Fits 22mm-31.8mm seat posts - Includes a pre-wired Epro 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims LIGHT MODES 1) Steady ON 2) Pulse Flash NiteRider recommends this headlight be installed by an authorized e-bike service and repair shop. Please reference your bike manufacturers manual for compatibility. Not compatible with 6 Volt systems.

Bright and efficient multi-purpose e-bike cycling light. Durable, heat-dissipating CNC machined aluminum construction. Two ultrahigh-output LEDs deliver up to 500 lumens. Enhanced MOR (Maximum Optical Reflection) lens with built-in side visibility. Intelligent Auto Day/Night dim mode. E-bike compatible 6 – 12v input, 6w easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Includes CNC fork mount and 140cm long power cable. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make/model/battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. Disclaimer: Direct X-Lock Mounting System Not compatible with all stems. Please see installation manual for stem compatibility. - 500 Lumens - Includes aluminum CNC fork and E-BIKE Stem mount - Enhanced Maximum Optical Reflection (MOR) lens - E-bike compatible 12 – 48V input - 130 cm power cable included - IPX7 water resistant - Dimensions: 44.5 x 41 x 25mm / 1.75 x 1.61 x 0.98" Motor Compatibility - Bosch: 6V, 12V - Shimano: E5000, E7000, E6100, E6110, E9000, E8000, E8080, E6002, E6012 - Yamaha: PWse - BionX - Brose Drive S (2018) - Continental: 48V Prime, 48V Revolution

- Double-lens technology provides HIGH-QUALITY precise light distribution - AUTO LIGHT SENSOR measures ambient brightness adjusting the light mode automatically - Side lighting for INCREASED VISIBILITY AND SAFETY - MEMORY FUNCTION remembers the last mode used - Fully USB-RECHARGEABLE - NEW snap-tight bracket - Display shows the remaining battery run time - battery symbol in the display starts flashing when battery level is below 20% - 60 LUX - 7 Modes - Run time on Eco = 30 hrs - Run time on High Steady = 3 hrs

The Pathfinder USB Headlight from Portland Design Works is unlike any other bike light on the market, incorporating technologies to help you see and be seen while riding, day or night. The Vertical Cutoff Beam is designed to focus the 200 lumen main beam onto the road in front of you and prevents lost lumens that can blind oncoming traffic. For daytime riding, the Daytime Running Flash is bright enough to make you seen even on the brightest days. The Battery Meter lets you know exactly how much battery life you have left before needing to recharge with the included USB cord. The Pathfinder includes a powerful lithium-ion battery and a darkness destroying CREE LED bulb. It provides superior luminous guidance for up to 25 hours of ride time. The rugged construction is weatherproof and strong enough to handle the abuse of an urban commute. - 4 Modes: Steady low (4 hours), Steady high (2 hours), Pulse (8 hours), Daytime Flash (25 hours) - Lumens and burn times certified by Labsphere Illumia Light Measurement System to FL1 standard - Vertical Cutoff Beam to focus 200 lumens on the road ahead - CREE LED - Battery Meter for Li-ion battery - Micro USB charging cord included; 3 hour charging cycle - Weatherproof exterior for all season riding - One second delayed power switch to prevent accidental on/off - Light wakes up in last mode used - Includes UV-proof quick on/off handlebar mount - Weight: 57 g (2 oz)