$6.99 - $9.99
- Permanently seals tube punctures up to 1/8 inch - Non toxic formula installs easily through Schrader valves - Complete with valve core remover and filler tube - Slime keg fills 160 tires at 1/2 the price per ounce of the 16 oz size
This is Continental's glue for gluing tubular ("sew-up") tires on aluminum tubular rims. The container has a brush built into the screw-on cap for easy glue application. You get enough glue to install about 12 tires.
- Specific DT-Swiss tubeless ready valve stems for tubeless applications
- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel
$10.99 - $16.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
- High performance, professional tubular glue that dries rapidly - Each tube is usually adequate for gluing two tubular tires - Law prohibits ORM-D materials from shipping by air
$15.99 - $49.99
Get unbelievable traction in even the slickest winter conditions by adding Bontrager Tire Studs to your stud-ready winter tires. The carbide tipped design provides biting traction with an easy to install, durable design. Key features - Carbide-tipped design provides long lasting and durable traction - Compatible with Bontrager stud-ready tires - Use Bontrager Tire Stud Tool for easy installation
$20.00 - $22.00
- Fully removable aluminum valve - Anodized red color - Intended for use with 320 tpi Vittoria tubular tires, Rubino Pro inner tubes, and latex inner tubes - 42mm, 60mm, 80mm, and 110mm lengths - Sold as a pair
All the pieces needed for tubeless tire setup on compatible rims. - Includes Rim Tape, 2 Universal Valves & 1 Valve Core Wrench
Challenge's Valve Extenders screw onto the end of Presta valves to make the valves 42mm longer so that the valves will protrude through wheels with tall rims far enough to be able to attach your pump and inflate the tires. You get two extenders and a wrench for them.
- Individual vulcanizing patches in bulk - Cement and sandpaper sold separately
$19.00 - $25.00
No.9 Tubeless valves for use with Whisky Tubeless rims and most other systems. These alloy stems feature removable Presta cores and are designed to fit up to 8mm valve holes. - Available in a number of lengths and colors to perfectly fit your rims and your sense of style. - Includes two valves
$8.00 - $50.00
Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.
$8.00 - $16.00
Whisky Parts Co. Tubeless Rim Tape.
Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened
Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually. - For use with removable valve core Presta tubes - Knurled end to keep pump from slipping - 3mm hex broach in the barrel to guarantee a perfect seal when tightened - Integrated air seal
PROCORE is an inner high-pressure air chamber for tubeless systems that allows dual air pressures for traction and impact protection. Procore allows low pressures (down to 14psi) to be run in tubeless tires, with a high-pressure inner chamber that locks the bead in place and prevents burping and rim dents from impacts. - Sold as a set with all components to set up a wheelset on one bike (tires not included) - Minimum internal rim width is 23mm - Maximum distance from rim well to rim inner surface is 20mm - Minimum tire pressure with ProCore is 14psi
$39.99 - $153.99
Looking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle performs under the most brutal race conditions. The cutting-edge microfiber molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. The formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride. Developed with the world's top downhillers and pro peloton teams, to give you the finest tire sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels/tires, No Puncture Hassle works from 15psi-120psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top ups on the go! - For Downhill, Enduro and Road tires - Seals tears and holes up to 6mm - Contains UV puncture detection - Won't dry out or ball - Works from 15psi-120psi and temperatures from -20°C to +50°C - Biodegradable
The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.
The Problem Solvers Presta Valve Extenders add 33 to 50mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders simply screw onto your Presta valves by hand.
Bigger than standard Presta valve nuts, the Big P-Nut is designed to provide extra leverage to better tighten tubeless valves on standard tubeless rims. - Over-sized design provides extra torque when tightening - CNC-machined from AL-6061 aluminum
Bigger than standard Presta valve nuts, the Big P-Nut is designed to provide extra leverage to better tighten tubeless valves on standard tubeless rims. - Over-sized design provides extra torque when tightening - CNC-machined from AL-6061 aluminum - Kit includes two 40mm long brass tubeless valves
- 6061 Aluminum valve and cap - Removable valve core - 4mm allen key slot for easy installation and removal - Comes with round & square rubber bases for different rim types - Spare alloy valve cap with integrated valve core removal tool
$2.99 - $27.99
Bontrager's latest TLR sealant seals faster, lasts longer, and provides better air retention so you have a better tubeless experience with easier setup. The ammonia-free formula won't corrode rims or degrade tire rubber, and it provides permanent repair for punctures up to 6.5mm. Product details - Improved flat protection seals punctures faster - Increased air retention holds air longer with 3x less air loss than the original - Compatible with all TLR tires for use on road, gravel, and mountain bikes - Ammonia-free mixture won't corrode alloy rims or degrade tires - Effective in temperatures ranging from -5 to 120 degrees F (-21 to 49 degrees C) - Cool new blue color - Use with Bontrager TLR wheels, sealant, and rim strips for a complete tubeless system designed and tested to work together - Can be used in tubes to help seal punctures
- Ingenious snap-In plugs do the work of rim tape at 1/3 The weight - Makes tire installation easier and nipple repairs faster than with tape - Red plugs fit rims with 8mm holes - Yellow plugs fit rims with 8.5-9.3Mm holes
Setting up tubeless tires can be difficult. Add a single-wall, flat profile fat rim to the equation, and the setup can be downright frustrating. Problem Solver's oversized Super P-Nut’s help with this. First, the bottom of the nut is concave, so the valve can be pulled further through the rim, creating a better seal. The larger outer diameter of the nut provides better grip and leverage so that you can get the valve tighter than with conventional nuts. It’s like a normal P-Nut. Only more super.
Specialized's 2Bliss Ready Rim Strips create a secure barrier, from sealant to rim, in a clean, simple to install strip. Mountain bike riders running 2Bliss can now change tires quicker and easier than with any other tubeless system. Diameter / Width - 26" — 23mm-559 PV - 26" — 25mm-559 PV - 650b — 31mm-584 PV - 650b — 39mm-584 PV - 29" — 23mm-622 PV - 29" — 25mm-622 PV - 29" — 31mm-622 PV
The Specialized Rim Strips provide the ultimate in protection between the rim and tube.
$2.99 - $28.00
The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires
$12.99 - $14.99
- Semi-transparent for precise application, this lightweight Rim Tape creates an airtight seal in a vital step for tubeless setups. - 18mm x 10 yards - Transparent to ensure consistent adhesion through a quick visual verification when applying the tape - Won't leave residue when changing tape - Slightly stretchy to allow for easier application - 10 yards per roll
Page 1 of 2 Next page