Wheels

Our thru-axle kit comes with everything you need to mount most 12x142 thru-axle bikes on your KICKR SNAP indoor trainer. This accessory will work with all editions of the Wahoo KICKR SNAP. It includes the following: - Threaded axle spacer M12 x 1.75 Coarse - M12 x 1.5 Medium - M12 x 1.0 Fine - End Cap

Upgrade or refresh your bike. - Original replacement wheel - Does not include skewer, reflector, rim strip, valve, or owner's manual

Upgrade or refresh your bike. - Original equipment replacement 20" 6-bolt disc brake wheels for Trek bikes - QR hubs: 100mm OLD front and Boost 141 rear - Pinned aluminum 35mm wide rims - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

Rubber rim strips for 24-inch diameter fatbike rims. - Sold individually

- Replacement steel quick release skewers

- Replacement rear skewer - Spacing: 135mm - Material: Steel

Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm.

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

Switching to tubeless or in need of valve replacements? Serfas Tire RX replacement valves will do the trick. Available sizes of 32mm, 44mm, or 60mm valves with removable cores, extra valve core, and Schrader to Presta adapter with core removal tool. Please note, Due to the multi-step chemical process and variables involved in anodizing, colors may vary slightly between batches produced.

Salsa springs for Flip-Off skewers

At the helm of taking traction, stability, speed, and stiffness to new heights stands the Roval Traverse Fattie 38 650b wheels with 110mm front and 148mm rear hub spacing. And while their Boost-spacing axle widths give the frame and fork clearance and stiffness that results in a stiffer, stronger, and more durable system at a minor weight penalty, what turns them into descending machines is the 38mm internal rim width. The reason behind this is relatively simple: aside from the lightweight, ultra-rugged E5 alloy construction, the combination of the revolutionary width with wider hub flanges equates to an increase in plus-sized tire volume for more suppleness in the ride quality. Not only this, but the ample width also better supports the tire, meaning that you'll experience less "burping" when riding tubeless, as well as a drastic increase in traction. These aren't just a one-trick pony, however. At the front hub, you'll get a 15x110mm thru-axle (end cap options included), and at the rear, the 148mm hub features DT Swiss internals for lightning-fast engagement and acceleration. And to top everything off, these wheels are hand-built to ensure the perfect tension and a long lifespan. Whether you have just picked up a new plus-sized 650b bike, or you're curious to try out three-inch tires on your Boost- spaced 29er, the Traverse 38 Fattie 650b wheels will leave you impressed after the first spin. - Rim Type: Alloy clincher, Zero Bead Hook design, 2Bliss Ready - Rim Material: E5 high-strength alloy - Rim Width: 38mm internal - Front Spoke Pattern: Radial/Three-cross (2:1) - Rear Spoke Pattern: Three-cross (1:1) - Spoke Count: 24-hole Front, 28-hole Rear - Spoke Type: DT Swiss Revolution - Nipple Type: DT Swiss Pro Lock hexagonal - Front Hub: alloy body, 15x110mm thru-axle only—15mm end caps included - Rear Hub: CNC-machined alloy body, high-quality DT 360 internals, includes SRAM XX1 11-speed freehub and 148 end caps - Compatible with Shimano 10- and 11-speed freehub bodies—sold separately. - Bearing Type: Sealed cartridge - Assembly Method: Hand-built - Total Wheelset Weight: 1870g - No rider weight limit.

Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding.

Champion 2.0 Black Spokes - One 264mm spoke = 7g

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - Compatible with straight pull hubs only - One 264mm spoke = 5.9g - Nipples sold separately

Ease of use, lightweight, and optimum performance in a single product. The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.

Upgrade or refresh your bike. - Original Equipment replacement Bontrager TLR wheels - Bontrager Approved double wall, non-eyeletted rims - Convert to tubeless with TLR rim strip and valve, sold separately - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

Upgrade or refresh your bike. GENUINE REPLACEMENT PARTS When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. PRODUCT DETAILS - Original Equipment replacement Bontrager TLR Disc wheels - Bontrager Approved double wall, non-eyeletted rims - Convert to tubeless with TLR rim strip and valve, sold separately - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

Upgrade or refresh your bike. GENUINE REPLACEMENT PARTS When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. PRODUCT DETAILS - Original Equipment replacement Bontrager TLR Disc wheels - Bontrager Approved double wall, non-eyeletted rims - Convert to tubeless with TLR rim strip and valve, sold separately - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

Upgrade or refresh your Bontrager wheels. Genuine replacement parts Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. - Replacement parts for Bontrager hubs using the DT 240 platform - Compatible with all Bontrager wheels with DT 240 hub internals - Versions available to fit QR or 12mm Thru Axle wheels

Tubeless setup made easy with valve stems designed to work as a system with Bontrager wheels, tires and rim strips The valves you need to upgrade to Tubeless These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Product details - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Use only with Bontrager TLR rim strip with rectangular base - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Sold as singles

Upgrade or refresh your Bontrager wheels. Genuine replacement parts Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. - Replacement freehub body - Compatible with SSR and Select wheels - Includes 11mm Allen key adapter for installation

- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel

A durable Tubeless Ready mountain wheel with Rapid Drive 54 hub and the added stiffness of Boost. Ready to rail on any trail With Line Comp 30, you'll feel the impact of wider rims on the quality of your ride. A Tubeless Ready (TLR) rim with a 29mm internal width better supports your tires so you can run less tire pressure and get more traction, better cornering stability, and increased control. Plus, a 54-tooth Bontrager Rapid Drive hub provides quicker engagement for fast acceleration. Product details - Rapid Drive 54 hub instantly transfers effort into forward momentum - Tubeless Ready (TLR) rims allow for quick transition to tubeless system upgrade - Boost 110/148 wider hub flanges enhance bracing angle for stiffer wheel - Ultra-durable rim with 29mm internal, 34mm external width, 28 hole front/rear - 28 front/rear 14G spokes with Alpina alloy locking nipples - 6 bolt disc, Shimano 10/11 speed, SRAM XD driver available separately - Includes TLR rim strip installed, TLR valve, valve core removal tool

• Replacement freehub bodies for Bontrager Comp level hubs • Compatibility: Race, Affinity Comp, and Rhythm Comp • Log onto the techsite for additional freehub body and model year information

To be used exclusively with Bontrager Tubeless Ready (TLR) rims. The rim strips you need to upgrade to Tubeless These rim strips are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Product details - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Use only with appropriate Bontrager TLR rim valve - Rim strip replacement is recommended if removed from the wheel - Sold as singles - White strip is recommended for carbon rims - TLR rim valve sold separately

These rim strips are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Key features: - To be used exclusively with Bontrager 29"/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel - For specific compatibility, access 'WHEELS' tab on the Tech Site or contact Customer Service

- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel

Zipp's 101 XPLR is a purpose-built wheel for gravel. Thanks to MOTO Technology, this wheel arms gravel cyclists with more control and durability over harsh terrain, providing a smooth ride quality that helps reduce fatigue. That means a more comfortable ride. The 101 XPLR—short for explore-is purpose—built for riders searching for adventure beyond the norm. Think of it as a magic carpet ride over primitive roads, especially with large tubeless tires at lower tire pressures. This wheel is ideal for gravel racing, adventure, or any long day in the saddle. Based on Zipp's MOTO Technology, the 101 XPRL's single-wall rim construction provides excellent compliance and vibration damping. Less fatigue, allows you to ride longer and faster. The 101 XPLR features the ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement. With 101 XPLR, victory is in the pursuit of adventure. - All-day comfort and compliant ride - Available in 700c or 650b - 27mm wide internal profile - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Less fatigue, which allows you to ride longer and faster - Frustration-free tire installation - ZR1 hubset for better seal design for improved durability and quicker response with 66 points of engagement - Lifetime Warranty