Stems

Recently added to Ritchey’s legendary WCS line-up of high-level components, the Ritchey WCS Switch stem features the tried-and-true Ritchey C220 handlebar clamp design seen on many Ritchey stems, but we've increased its width for additional stiffness. We’ve also rotated the clamping area a few degrees downward to create a flatter and more aerodynamic top stem section. But wait, there’s more! The front of the WCS Switch stem also includes a reversible accessory mount. Designed to accommodate accessories such as cycling computers, cameras, and power meter head units, this mount is completely hidden within the front clamp of the stem until you decide to mount your favorite accessory. Aside from all of that, everything else on this innovative stem is new and designed to stealthily conceal cables into the headset and frame. Up to three cables – such as for the rear brake, shifter, electronic drivetrain or even dropper post - are effortlessly integrated with the Ritchey Switch System spacers and Switch headset (both sold separately) to cleanly route the hidden cables into the frame. The Ritchey WCS Switch stem includes a matching compression cap.

The new Ritchey WCS Toyon stem takes its lead from the original, award-winning Ritchey C220 stem and gives it a more modern shape and increased stiffness for improved handling and greater responsiveness. The Toyon retains the clamping surface area of the C220, which creates a more secure interface by wrapping a full 220° over the handlebar. Its bolt forces are aligned with the clamp so that the body "embraces" the handlebar—a design which is less prone to damaging lightweight bars and allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. Built from life and all that inspires it, the Toyon builds upon the proven and celebrated C220 design with a fresh, squared aesthetic that adds to the overall harmony of modern frame designs—matching its good looks with enhanced confidence and a more lively feel for wherever your rides take you. - Matching top cap included - 6° of positive or negative rise - 1-1/8" steerer diameter - Stem body wraps 220° around bar clamping area, holding it in place for easy installation - Material: 2014 alloy - Bolts: stainless steel black - Matching top cap included - Angle: 84°/6° - Bar clamp diameter: 31.8mm - Bar clamp width: 44mm - Steerer diameter: 1-1/8" (28.6mm) - Steerer height: 42mm - Weight: 140g (100mm)

The Ritchey WCS Trail Stem represents Ritchey's first stem specifically designed for today's 5-6-inch travel trail bikes using wide bars. More than just a beefed-up version of other stems, with the Trail stem we revised the patented C260 clamp to a 220-degree version that fits a wider variety of riser bar bends and still packs a dramatic increase in stiffness and strength over competitor's designs. Using 3D Forged 2014 alloy, the WCS Trail Stem serves up superior strength while remaining lightweight. The extra-wide bar clamp takes stiffness to the next level, fits most riser bars, and ensures plenty of confident control out on the trail. - Material: 3D Forged 2014 alloy - Angle: Zero rise - Steerer Height: 45mm - Faceplate Width: 40mm - Steerer: 1-1/8” - Ritchey Blatte finish - 115g (70mm)

- CNC machined 2014 aluminum body and 7075 aluminum clamps - 240 degree wrap-around, twin plate clamping system - External webbing to maximize structural strength - 118-158g including stainless steel bolts

Renthal's revolutionary Integra 35 stem combines high strength with ultra-low weight. The use of two independent, C-shape handlebar clamps allows the stem body material to be reduced to a minimum, while maintaining an incredibly stiff and strong structure. The ultra-wide, 64mm handlebar clamping area increases torsional rigidity and the use of just six bolts vastly reduces overall weight. In addition, the uninterrupted clamp on the underside of the handlebar eliminates stress risers found on most other clamps, which can lead to handlebar failure.

Renthal's revolutionary Integra stem combines high strength with ultra-low weight. The use of two independent, C-shape handlebar clamps allows the stem body material to be reduced to a minimum, while maintaining an incredibly stiff and strong structure. The ultra-wide, 64mm handlebar clamping area increases torsional rigidity and the use of just six bolts vastly reduces overall weight. In addition, the uninterrupted clamp on the underside of the handlebar eliminates stress risers found on most other clamps, which can lead to handlebar failure.

The new ShockStop PRO Stem blends seamlessly with the aesthetic of modern bikes, while reducing fatigue and strain. Along with the ShockStop Suspension Seatpost, this system works together to suspend the rider and smooth out rough terrain on the bike you already own, making your ride smoother, faster, and more comfortable. Benefits: - Go further—reduce fatigue from bumps and vibrations - Ride faster—energy that is normally wasted suspending your body is converted into forward motion - Take control—customize your suspension feel to float over obstacles and maintain control over rough terrain - GPS and Utility Mounts sold separately Details: - Titanium Hardware - 15% Reduction in Weight over standard ShockStop - Refined premium finish - The ShockStop Stem in available in +/-6 degree angle with 80mm, 90mm, 100mm, 110mm, and 120mm lengths - Effective suspension travel: up to 20mm - Includes 5 swappable elastomers to fine tune your riding style - Check technical specs for compatibility What's in the Box: - 1 x ShockStop PRO Stem - 5 x swappable elastomers (2 pre-installed, 3 additional in box) - All required hardware

An adjustable stiffness suspension stem that smooths out the ride by reducing the affects of impacts and road vibrations. - Unwanted vertical movement is absorbed by twin interchangeable elastomers - Stem retains torsional rigidity - Travel is limited to 1-2 centimeters - Made with 6061-T6 Aluminum - Includes 5 swappable elastomers (2 pre-installed, 3 additional) to customize the ride feel for your bike, weight, and riding style

Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.

RaceFace designed their Atlas 35 stem to reduce overall system weight while retaining the proven stiffness and performance the Atlas line is known for. The stem itself is measurably stiffer than the 31.8mm offering and, although the system is a seemingly burlier build, the weight savings gained by the reduction in bar material actually makes the 35 system lighter overall. An impressively light, strong addition to your aggressive trail or DH/FR build. - Four-bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry - Faceplate eliminates stress risers which cause your bar to bend or break - Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube - Stack Height: 40mm

The RaceFace Atlas is designed to bridge the needs of AM and FR/DH riders: light enough for AM, tough enough for FR and DH, providing the ultimate in versatility. - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry - Faceplate eliminates stress risers which cause your bar to bend or break - Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube - Stack Height: 40mm

RaceFace's Chester 35 Stem is a practical stem with 2 length options and that legendary bomb-proof Race Face toughness baked right in. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Stack Height: 42mm

The Chester 35 Direct Mount stem is a practical 2-piece design with big bold graphics and that legendary bomb-proof Race Face toughness baked right in. - The Chester 35 direct mount stem is an all new 2 piece direct mount design - Forged and machined from 6061 aluminum - Weight saving single bolt faceplate - Four bolt bar clamp holds bar securely in position. - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates 'stress risers' which can cause your bar to bend or break

- Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates ‘stress risers'

Race Face's Ride stem is designed specifically for riders looking for Race Face engineering and quality at a value price point. - Forged and shot peened from 6061 aluminum for high strength and fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Machined logo on bar clamp

Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation

Simple, elegant, lightweight design can be run in negative or positive position for -17°/ 17° in rise. 3D forged 6061-T6 aluminum combined with a 4-bolt faceplate provides increased stiffness. - Weight: 162g (100mm) - Length: 70, 80, 90, 100, 110, 120, 130mm (±17°) - Material: 3-D Forged 6061-T6 Aluminum - Clamp Diameter: 31.8mm - Angle: 73° (±17°) - Steerer Tube Diameter: 11/8in - Stack Height: 40mm - Clamp Width: 40mm - Clamp Tourque: 5Nm - Finish: Matte Black with White Accents

Profile's Aris OS stem is a no-nonsense stem made from 6061-aluminum that's been shot peened and anodized for strength and durability. The 4-bolt faceplate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.

Profile's Aris stem is a no-nonsense stem made from 6061-aluminum that's been shot-peened and anodized for strength and durability. The 4-bolt face plate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.

On the surface, the Vice stem may look simple, but under that beautiful veneer lies hours of 3D modelling, countless revisions, and tons of real-world ride testing. All of this is done to provide a light, stiff stem that can handle tremendous forces from every conceivable angle. - 3D Forged and Machined 6061 Alloy construction - Torx, A2 Stainless hardware - 0 deg rise

The Boxcar Stem from Paul Components is the perfect combination of stiffness, strength, and reasonable weight. All screws are high-strength stainless steel with the popular T25 head. Made in Chico, California with US-sourced 2024 aircraft alloy. - Stack height: 36mm - Weight: 155g (90mm)

Nitto Dynamic Stems are cold forged and will fit 26.0mm handlebars and 25.4mm handlebars with a shim - Cold forged - 26.0mm stems will fit 26.0 handlebars and 25.4mm handlebars with shim - Quill Insertion Diameter: 25.4mm for 1 1/8" stems and 22.2 for 1" stems - 45mm range from minimum insertion to max insertion; 78mm from minimum insertion to the top of the quill

Kalloy's 822 Adjustable Stem lets you set up your handlebars exactly where you want them using just an allen wrench! With a 0-60° rise, you're sure to find a position that puts you comfortably in control. Its 4-bolt handlebar clamp makes bar changes easy and secure. - For quill-style steerers

Optimised for the perfect balance of weight and stiffness. Gone are the days that XC meant noodly handling. Our new stem is designed to cope with the extremes of a modern XC race course, without carrying so much as an extra gram of weight. Whether crossing continents, or smashing laps, we’ve got your back. KEY FEATURES - Available in 70mm or 90mm, 0° rise - CNC machined from 2014-T6 aluminium - Titanium bolt upgrade kit available - Stainless Steel bolts: 136g 70mm // 149g: 90mm - Ti bolt upgrade kit // 124g 70mm // 137g: 90mm - Available in black, silver, bronze, red, blue, orange & purple - Proudly Designed, Tested and Manufactured in Barnoldswick, UK

At just 113g for a 100mm extension, the Energy stem represents cutting-edge aluminum construction. The shape is 3D-forged from 2014 aluminum for great strength, with the final refinements carried out by CNC machining. Titanium bolts complete the package. - Semi Integrated Cable routing (SCR) - 3D-Forged and CNC-machined from AL2014 - 4-bolt sculpted SL faceplate

At just 113g for a 100mm extension, the Energy stem represents cutting-edge aluminum construction. The shape is 3D forged from 2014-aluminum for great strength, with the final refinements carried out by CNC machining. Chromoly bolts complete the package.

Basic, clean, and dependable performance—that's the Gossamer stem. 6061-T6 aluminum is forged and then CNC-machined to achieve the Gossamer's shape. The four-bolt faceplate is cold-forged and holds the bars with authority. Laser-etched graphics are the finishing touch. - 3D-forged and CNC-machined from AL6061/T6 - 4-bolt cold-forged front clamp diameter - Chromoly hardware

FSA ACR (Aerodynamic Cable Routing) Stems have a low-profile frontal area that is suitable for road and gravel riding. - Aerodynamic Cable Routing (ACR) - Low-profile frontal area - No rotation limit - Body and faceplate - 6061 T6 - Chromoly hardware - Specific frame and headset required - 31.8mm handlebar clamp diameter - 30mm fork clamp stack height - Compatible with: K-Force Light ACR Compact, SL-K ACR Compact, Energy ACR Compact, K-Wing AGX and K-Wing AGX handlebars

FSA's K-Force OS-99 CSI is 3-D forged and CNC machined from AL2014 before a uni-directional (UD) carbon weave skin is applied through the Carbon Structural Integration (CSI) process. To further reduce weight the OS-99 uses a 4-bolt sculpted AL2014 alloy/carbon faceplate and titanium hardware. CSI is a process that permanently bonds carbon to alloy, to create a true hybrid product, with many of the benefits of aluminum and carbon. - Stack Height: 41mm - Weight: 126g (100mm)

FSA's Omega line is the perfect workhorse component group for the sport rider who wants race-winning technology and durability along with classic good looks. - 3D-forged and CNC-machined from AL6061/T6 - 4-bolt cold-forged face plate - Chromoly hardware - ±6° - 31.8mm handlebar clamp diameter - 35mm fork clamp stack height - 127 grams (100mm)