Parts & Accessories
$4.50 - $6.25
Used to adjust crank chainline or ensure proper bearing preload when using 30mm spindle cranks. - Inner Diameter: 30mm - Outer Diameter: 41.5mm - Machined engineering-grade Delrin - Sold Individually
The North Shore Billet 1×11 Spider replaces the removable chain ring spider so that you can run a SRAM XX1 chain ring on Truvativ X0, X01, X1, X9, GX, S2210, and S1400 cranks. There are no mounting holes for the granny ring and the single ring’s position is designed to give a better chain line throughout the entire gear range. The chain ring tabs accept an optional rock ring for All Mountain or Enduro riding.
$90.00 - $117.00
Shimano Chainring Bolts - For use with M9000 chainrings
The Wheels Manufacturing BB30 Bottom Bracket Adapter for Campagnolo Ultra- Torque Cranks adapts Campagnolo Ultra-Torque cranks to BB30-standard frames. This adapter fits over the installed crank bearing so no bearing removal is required for installation. This adapter is machined from engineering-grade Delrin. - 48g/pr * The design of these adapters includes the use of the Campy bearings factory installed on the crank spindle.
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks. - 29mm I.D. for use with SRAM DUB cranks - 10 spacers per bag - Machined engineering-grade Delrin
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle
For Race Face 30mm Cinch System cranks only. Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle. - 30 x 136.5mm is for 120mm spaced BMX hubs and 68/73mm BBs - 30 x 151.5mm is for 150/157mm Hubs
TruVativ Crank Arm Fixing Bolts - Monocoque carbon crankset with hollow-arm design - FSA Mega Tooth chainring design greatly improves chain retention - FSA BB392 compatibility allows use in nearly any frame - Bottom bracket not included
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact. - Injection molded plastic crank arm protection - Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes - Material: Injection molded plastic - Recommended Group: XX1, X01, XX, X0
Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.
The 1x guide is the definitive cross-country chainguide. Used on the World Cup circuit and even in the 2012 London Olympics, the 1x has a proven track record of dependability and performance. The 1x is the perfect guide for riders and racers wanting a lightweight single-ring front drivetrain for cross-country use or riders wishing for more security out of their "narrow/wide" or XX1/X01 setups. Freshly updated for 2015 with the new co-molded "TR" upper guide - lighter and quieter, what's not to love? - Adds security to "narrow/wide" 1x10/11 and XX1/X01 drivetrains - Most models accommodate 26-38t chainrings - Tracked and grooved upper guide / backplate interface increases stiffness and eases installation - New co-molded "TR" upper guide with softer durometer interior for silent guidance - All install and adjustment operations possible with just a single 4mm HEX wrench. - BB mounted guides are only compatible with traditional, threaded BB systems
Race Face Cinch aluminum crank arm bolt. 18mm, fits XC/AM cranks.
Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10
- Series: SLX - Crank Construction: HOLLOWTECH II Technology
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or stainless steel options
$79.99 - $89.99
Spindle and hardware kit for Race Face CINCH MTB and fatbike cranks.
Choose the Hope Crankset Spider you need for the chainring combination you want. - Interchangeable and replaceable on Hope Cranksets - Single chainring model for use with a single 104BCD chainring with or without bashguard - Double chainring model for use with a 64/104BCD double chainring setup - Allows installation of bashguard on outer position
Use these Wheels Manufacturing Crank Spindle Spacers to adjust chainline or bearing play in bottom brackets. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Machined engineering-grade Delrin - 10 spacers per bag
Designed for enduro and trail riding, the AMg V2 Alloy chain guide features an upper guide for chain security and an integrated skid to protect the chainring and frame. - Compatible with 1x9, 1x10, and 1x11 drivetrains - Integrated nylon skid glides over rocks - Softer co-molded upper for quiet operation - Installs and adjusts with a single 4mm hex - Compatible with chainlines 49mm and wider - Tracked and grooved upper guide and backplate increases stiffness
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the RaceFace cranksets that have removable Cinch spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)
Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the SRAM cranksets that have removable Direct Mount spiders and are only compatible with CAMO rings and bolts. Four different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - M2 (minus 2mm - dished toward the frame): For 49mm chainline on short-spindle BB30 cranks - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank. Can also be used to achieve a Boost chainline with a short-spindle BB30 crank.
The Easton Spider and Ring assembly features the Cinch Direct Mount System, making a swap between ring configurations a fast and simple procedure. This system also provides a significant weight savings by eliminating the material overlap and extra bolt hardware that is required for a traditional spider with chainring configuration. - EA90 Aluminum
Race Face CINCH Crank Puller • Puller cap for Cinch model Race Face cranks only, including Next SL, SixC and Turbine • Puller cap utilizes 16mm hex key • 26mm thread
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs. - 6mm length - Made in the US out of 7075 Aluminum Alloy - Has hex heads on both the bolt and nut for easy installation - Max torque of 6-7 Nm with light grease on threads only
- Stainless steel chiainring/spider lockring for all e*thirteen cranks that use the Quick Connect Direct Mount System - Requires e*thirteen spider lockring tool. Use QBP part # TL0212
- Chainring bolts for double cranks - Torx heads
- Adapts American/Pro BMX frames with a non-Threaded 51.3mm (2.02") i.d. bottom bracket shell to accept English-threaded bottom bracket & crank applications - CNC-machined aluminum with three steel connecting bolts to prevent independent rotation
Page 1 of 3 Next page